VASE LAMPSHADE STUDIO - TWELVE FREE LAMPSHADES

Each folder holds the ONE-PIECE model: the shade with its E27 bulb holder
already part of it. Print this in vase mode and the whole lamp comes off the
bed finished, no supports, no glue, nothing to assemble.

If you want the shade and the holder as separate files, each design has its
own pack with all three STLs in it.

HOW TO PRINT
  1. Load the .stl
  2. Turn on vase mode (Cura: Spiralize Outer Contour / PrusaSlicer and Orca:
     Spiral vase / Bambu Studio: Spiral mode)
  3. Set SOLID BOTTOM LAYERS so the holder prints solid before the spiral:
         solid bottom layers = holder height / layer height
     The holder is 10 mm tall: 50 at 0.2 mm layers, 34 at 0.3 mm.
  4. Extrusion width 0.6 to 0.8 mm. This is your wall thickness and it decides
     how much light gets through.
  5. No supports. Vase mode cannot use them and this does not need them.

  Layer height  0.2 mm fine, 0.3 mm a bolder rib
  Temperature   5 to 10 C above your normal, a single wall cools fast
  Cooling       100 percent
  Speed         30 to 40 mm/s
  Filament      natural, white or pale. Dark colours block the light.

SAFETY, PLEASE READ
  Use LED BULBS ONLY. PLA softens at about 60 C and an incandescent or halogen
  bulb will deform it. A 6 to 9 W LED is ample. Leave an air gap between bulb
  and wall. Use a proper E27 holder, flex and switch.

THE TWELVE
  Ogee Bell          220 mm tall, 198 mm wide, opening 54 mm
  Twisted Star       232 mm tall, 172 mm wide, opening 89 mm
  Nautilus Spiral    228 mm tall, 162 mm wide, opening 86 mm
  Basket Weave       222 mm tall, 197 mm wide, opening 86 mm
  Barley Twist       236 mm tall, 189 mm wide, opening 108 mm
  Tulip Flare        215 mm tall, 200 mm wide, opening 164 mm
  Onion Dome         210 mm tall, 192 mm wide, opening 160 mm
  Fan Pleats         226 mm tall, 197 mm wide, opening 72 mm
  Faceted Drum       208 mm tall, 185 mm wide, opening 126 mm
  Cable Column       242 mm tall, 191 mm wide, opening 116 mm
  Pinecone           215 mm tall, 187 mm wide, opening 73 mm
  Bamboo             238 mm tall, 187 mm wide, opening 122 mm

LICENCE
  Free for personal use. Print as many as you like, for yourself and as gifts.
  Please do not resell the files.

MADE WITH
  Vase Lampshade Studio: 105 parametric shade profiles with the bulb holder
  generated to fit whatever shape you make. Try it free in your browser at
  digitalchiselco.com/lamp-studio
